• Provides safe filtration while easy to use
• Saves oil costs
• Improves product quality
• Designed to be used with any model front drain fryer
• High speed pump
• Stainless Steel construction
• Built-in melt cycle

The Keating Portable Filter is designed to minimize oil breakdown and extend oil life. Built for use with appropriately sized front drain fryer models, the Portable Filter is easily maneuvered and can be rolled away for storage.

  Download the Portable Filter Specification Sheet

SAVE ON OIL COSTS

Keating’s Nutroilator® System combines the advantages of low temperature cooking, Cold Zone sedimentation and a one-step, multi-layered filter to purify oil. Cooking temperature, moisture and oxidation are the main causes of oil breakdown. Nutroilation conditions oil and removes free fatty acids, which if done on a regular basis, extends the life of the oil.

FAST AND EASY FILTRATION

The high capacity pump filters five gallons of oil per minute. Simply roll Keating’s Portable Filter under the fryer drain valve and place hose in fryer vessel. Empty oil into filter vessel, close drain valve and switch on filter pump while holding the hose nozzle. Crumbs, debris and contaminants are removed and oil is purified. When solidified shortening is present, the built-in melt cycle safely melts it to prevent it from clogging the filter.

EFFECTIVELY REMOVES FOOD PARTICLES

The multi-layered filtration system removes food particles. The optional strainer basket separates large crumbs from the oil and traps them before entering the filter. The remaining oil is conditioned by Keating’s Acidox filteringn compound to remove fatty acids and then pumped through filter paper to remove any remaining debris.

DURABLE CONSTRUCTION ENSURES SAFE FILTERING

The deep stainless steel construction of the filter vessel safely holds hot oil during filtration. The heavy duty handle and polyurethane casters give you more control while maneuvering the filter. The 5-ft hose has an adjustable angled nozzle with safety handle to safely pump filtered oil.

HOW TO USE THE KEATING PORTABLE FILTER

A. Preparation

1. Operator should be outfitted with the proper protective gear.
   
   1. Goggles or face shield.
   2. Gloves, apron, footwear (oil and heat resistant).
      
2. Heat oil in fryer to between 250°F to 350°F.
3. Remove screen over tubes/elements with tongs.
4. Stir oil thoroughly (with wooden paddle) until all water is removed and shut fryer off (including pilot) before filtering.
   
   WARNING: OIL IS HOT. USE CARE WHEN FILTERING.
   
   
5. Prepare filter tub.
   1. Insert filter screen.
   2. Insert filter paper on top of screen (use new sheet for each fryer to be filtered).
   3. Insert hold down ring.
      
   4. Add Acidox powder on top of paper.
   5. Insert strainer basket into filter tub.

NOTE: For proper filtration, paper must be fitted neatly and sealed with hold down ring to bottom of filter.

NOTE: One package of Acidox for 40 lbs. of hot fat.

 

Figure 1

B. Filtration

1. Place filter tub under fryer drain. Open main valve and drain the hot oil flow into filter vessel. (See Figure 1)
   
2. Turn on pump and flush down the sides and bottom of the fryer into filter to clean out all food and burned particles. (See Figure 2)
3. Clean fryer vessel with non-abrasive scrub pad and Keating Klenzer (rinse with hot oil from filter).
4. When fry pot is clean, drain and pump nutroilrated oil thru the filter and back into the fryer. (See Figure 3 & 4)

Figure 2

C. Clean-Up

CAUTION: FILTER PARTS WILL REMAIN HOT FOR 15 MINUTES, ALLOW TO COOL BEFORE CLEAN UP.

Always prepare your Nutroilator for use for the next period by removing the old filter paper and debris. Wipe out filter vessel, install a new filter paper and replace the filter ring. Wipe down and cover the equipment.

1. Remove strainer basket and hold down ring (clean thoroughly).
2. Remove and discard old filter paper and debris.
3. Wipe out filter vessel.
4. Hold the hose upright and allow to drain.
5. Replace filter screen.
6. Install new filter paper and replace filter ring.
7. Wipe down and cover the filter.

CAUTION: IF YOU RUN WATER THROUGH THE FILTER DURING CLEANING YOU MUST RUN SOME OIL THROUGH THE PUMP TO COAT THE MOVING PARTS.

Figure 3

Figure 4